Safety information
Find all relevant documents here
Mains voltage | 230V |
---|---|
Mains voltage tolerance | -15% / +10% |
Welding current max. | 14 A |
Open-circuit voltage | 30 V |
Degree of protection | IP23 |
Length | 365 mm |
Width | 130 mm |
Height | 285 mm |
Weight | 4,5 kg |
Weight | 4,5 kg |
Find all relevant documents here
Activate your warranty for free and without obligation
Clean and passivate in one step. MagicCleaner is the most advanced system for electrochemical cleaning units. With one machine, you can clean, polish, and inscribe stainless steel. Remove post-weld temper colouration and restore the protective passive layer at the same time.
After cleaning, the polishing process ensures a consistently lustrous surface and improves the steel passivation process. In addition, the MagicCleaner provides the option to permanently inscribe stainless steel surfaces - the perfect alternative to stickers or laser engraving.
Ready to use in 2 steps and extremely lightweight at just under 4.5 kg, MagicCleaner 150 is the perfect companion on the construction site or in the workshop.
/ Cleaning torch MC150
/ Grounding cable 10 mm², 3 m
/ Torch holder MC150
/ Basic kit: electrodes/brushes/pads
/ Ready for use in 2 steps
/ Lightweight at just under 4.5 kg
/ Direct selection of the desired process
/ Manual electrolyte dosing
/ Attachable 100 ml tube
/ For easy securing of pads and storage of the torch
/ Tried-and-tested robust housing
Functions / |
MagicCleaner 150 |
MagicCleaner 300 |
AC cleaning |
🗸 | 🗸 |
DC polishing | 🗸 | 🗸 |
Printing (AC & DC) | 🗸 | 🗸 |
Integrated pump | - | 🗸 |
Output | 15 A | 30 A |
Cleaning torch MC150 | 🗸 | 🗸 |
Cleaning torch MC300 | - |
🗸 |
Cleaning fluid (contents) | 100 ml tube | 1.8 l tank |
ToolCase 60 | 🗸 | - |
Toolcase 120 | - | 🗸 |
ToolBox 210 | - | 🗸 |
Trolley available | - | 🗸 |
Inverter technology
/ Weight reduction
/ Energy-saving
Existing certifications
/ CE, UKCA, UL/CSA, CCC, EAC, AUS/NZ